Product Detail
Specification
| Basic Information | Applied Raw Materials | PP/PE/EVA/ABS etc. |
| Production | ||
| Dimensions | 2900*1800*2100 | |
| Machine Weight | 2.3T | |
| Plasticizing System | Barrel and Screw | ∮65mm, aspect ratio L/D=26:1 |
| Barrel and Screw Material | 38CrMoAlA, nitrided | |
| Plasticizing Capacity | 55Kg/H | |
| Number of Heating Stages | 5-stage cast aluminum heater + mica heating coil | |
| Heating Power | 13KW/H | |
| Extrusion Motor | 11KW three-phase asynchronous motor (380V, 50HZ) (Shanghai Lichao) | |
| Reducer | 146 hardened tooth surface, high strength, low noise and anti-wear reducer | |
| Mold Head | Structural Type | Center feed head |
| Maximum Diameter of Extrusion Port | 120mm | |
| Heating Method | Mica heating coil 3.6KW | |
| Temperature Control | Intelligent Temperature Meter | |
| Mold Opening and Closing Device | Mold Structure | Three-point beam arm structure |
| Mold Size | 500*380mm | |
| Opening and Closing Distance | 110-550mm | |
| Mold Thickness | 120-220mm | |
| Clamping Force | 50KN | |
| Electronic Control System | Operation Interface | Touch screen operation, fault alarm self-display |
| Temperature Control | Intelligent Temperature Control Meter | |
| Action Control | All-in-one computer | |
| Electrical Protection | Current overload, electrical short circuit automatic protection function | |
| Hydraulic System | Overview | Multi-function hydraulic integrated block, proportional control, high efficiency and energy saving |
| Oil Pump Motor | 5.5KW three-phase asynchronous motor (380V, 50HZ) | |
| Oil Pump | Vane Pump | |
| Valve | Hydraulic valve combination | |
| Oil Pipe | Double-layer high-pressure wear-resistant oil pipe | |
| System Pressure | 100Kg/cm² | |
| Cooling Method | Independent water circulation, oil cooler cooling | |
| Pneumatic System | Overview | Pneumatic component combination |
| Air Source Pressure | 0.6Mpa | |
| Air Source Displacement | 0.7M3/min | |
| Solenoid Valve | ||
| Cooling System | Overview | Three independent cooling water circuits for mold, barrel and oil source, no interference with each other |
| Cooling Medium | Natural water, groundwater (frozen water is better) | |
| Water Source Flow | 65L/min | |
| Water Source Pressure | 0.3-0.6MPa |
| Hydraulic System | ||
| 1 | Oil Circuit Cooling Water | Yes |
| 2 | Oil Temperature and Oil Level Control | Actual Observation |
| Pneumatic System | ||
| 1 | Working Pressure | 1.0Mpa |
| 2 | Blowing Pressure | 0.6-0.8Mpa |
| 3 | Mold Blowing | Yes |
| 4 | Quick Exhaust | Yes |
| Electronic Control System | ||
| 1 | PLC Control | All-in-one Machine |
| 2 | Operation Interface | Touch Screen |
| 3 | Recipe Storage | Yes |
| Electric | ||
| 1 | Contactor | HUYU |
| 2 | Total Capacity (approx.) | 33.1kw |
| 3 | Average Energy Consumption (approx.) | 18kw |
| Heating Control | ||
| 1 | Heating Main Element | Solid-state relay + intelligent temperature control |
| 2 | Thermocouple Type | K division |
| 3 | Upper and Lower Limit Alarms | Yes |
| 4 | Thermocouple and heating segment line alarms | Wire Break Alarm |
| 5 | Preheating Function | Yes |
| Other | ||
| 1 | Cooling Water for Machines | Yes |
| 2 | Cooling Water for Molds | Yes |
Components
| Item | Picture | Notes |
| Mold Head |  | Center feed head |
| Mold opening and closing mechanism |  | Mold opening and closing, mold shifting system: three-point beam arm structure. (Mold shifting in place, hydraulic shock absorber control, no impact vibration) |
| Oil Pump |  | 5.5KW oil pump, proportional pressure control, equipped with imported famous brand hydraulic components, stable and reliable. |
| Intelligent microcomputer control system |  | All-in-one touch screen computer. |
| Blower |  | Cast aluminum heating coil + mica heating coil |
| Electric box |  | |
| Temperature controller |  |
DBKA-65 Semi-automatic blow molding machine (single mold head, double stations)
Are you still hesitating? Get a sample first and contact us!
Category
keyword
Related Products
Get a quote
If you are interested in our products, please leave your email and we will contact you as soon as possible. Thank you!
Contact
1204 Rongsheng Business Building, east of Yingbin Avenue, Yunhe District, Cangzhou City, Hebei Province
At Debeike, with experience of over a decade, we work out the best solution for your production
Message content