Product Detail
| Basic information | Applied raw materials | PP/PE/EVA/ABS etc… |
| Production | ||
| Dimensions | 8600*3200*4800mm | |
| Machine weight | About 26T | |
| Plasticizing system | Barrel and screw | ∮120mm (spray alloy), aspect ratio L/D=26:1 |
| Barrel and screw material | 38CrMoAlA, nitriding | |
| Plasticizing capacity | 200-300Kg/H | |
| Number of heating sections | 8-stage heating, cast aluminum heater + mica heating coil | |
| Heating power | About 28KW/H | |
| Extrusion motor | 90KW three-phase asynchronous motor (380V, 50HZ) | |
| Reducer | 315 hardened tooth surface, high strength, low noise anti-wear reducer | |
| Mold head | Structural type | 22L storage cylinder die head |
| Heating method | Mica heating ring, 28KW | |
| Adjustment method | XUNJIE 100-point arm thickness controller | |
| Temperature control | Modular temperature control | |
| Mould opening and closing device | Mold size | 1600*1700mm |
| Maximum mold size | Actual production of products | |
| Mold thickness | Actual production of products larger than 400mm | |
| Mold opening and closing stroke | 900mm | |
| Clamping force | 850KN | |
| Electronic control system | Operation interface | Touch screen operation, fault alarm self-display |
| Temperature control | Automatic temperature control module | |
| Motion control | Japan Mitsubishi PLC, Chinese and English programming | |
| Electrical protection | Current overload, electrical short circuit automatic protection function | |
| Hydraulic system | Overview | Multi-function hydraulic integrated block, proportional control, high efficiency and energy saving |
| Oil pump motor | 30KW servo motor | |
| Oil pump | Vane pump | |
| Valve parts | Hydraulic valve combination | |
| Oil pipe | Double-layer high-pressure wear-resistant oil pipe | |
| System pressure | 100Kg/cm² | |
| Cooling method | Independent water circulation, oil cooler cooling | |
| Pneumatic system | Overview | Pneumatic component combination |
| Air source pressure | 0.6Mpa | |
| Air source displacement | 0.7M3/min | |
| Solenoid valve | ||
| Cooling system | Overview | Three independent cooling water circuits for mold, barrel and oil source, no interference with each other |
| Cooling medium | Natural water, groundwater (frozen water is better) | |
| Water source flow | 80L/min | |
| Water source pressure | 0.3-0.6MPa |
| Hydraulic system | ||
| 1 | Servo drive | Taiwan Delta |
| 2 | Oil circuit cooling water | Yes |
| 3 | Oil temperature and oil level control | Actual observation |
| Pneumatic system | ||
| 1 | Working pressure | 1.0Mpa |
| 2 | Blowing pressure | 0.6-0.8Mpa |
| 3 | Mold blowing | Yes |
| 4 | Quick exhaust | Yes |
| Electronic control system | ||
| 1 | PLC control | Mitsubishi Japan |
| 2 | Operation interface | Mitsubishi Japan |
| 3 | Recipe storage | Yes |
| Heating control | ||
| 1 | Heating main element | Solid-state relay + intelligent temperature control |
| 2 | Thermocouple type | K division |
| 3 | Upper and lower limit alarms | Yes |
| 4 | Thermocouple and heating segment line alarms | Wire break alarm |
| 5 | Preheating function | Yes |
| Other | ||
| 1 | Cooling water for machines | Yes |
| 2 | Cooling water for molds | Yes |
| Item | Picture | Notes |
| Mold head |  |
22L storage head XUNJIE 100-point wall thickness controller |
| Wall thickness controller |  |
7.5KW pump |
| Screw |  |
Five-stage cast aluminum heating ring |
| Robot hand |  |
|
| Mold opening and closing mechanism |  |
Three-point beam arm with high strength and rigidity, center clamping, low friction mold opening and closing, and mold shifting mechanism |
| Bottom blowing device |  |
|
| Platform lifting |  |
|
| Control panel |  |
XUNJIE 100-point wall thickness control panel Mitsubishi touch screen |
| Temperature controller |  |
Temperature control module |
| Electric box |  |
All major electrical parts are made of components imported from Japan and Taiwan to ensure stable machine performance. |
| Intelligent microcomputer control system |  |
Controlled by Japanese Mitsubishi PLC computer plus human-machine interface (Chinese or English), operated by touch screen. All process settings, changes, retrieval, monitoring, fault diagnosis and other functions are realized on the touch screen, with point-free contact working principle and durable components. |
| Servo system inverter |  |
Delta servo system RBCA inverter |
| Oil pump |  |
Servo oil pump |
DBK-120 Energy storage cylinder blow molding machine
Are you still hesitating? Get a sample first and contact us!
Related Products
Get a quote
If you are interested in our products, please leave your email and we will contact you as soon as possible. Thank you!
Contact
1204 Rongsheng Business Building, east of Yingbin Avenue, Yunhe District, Cangzhou City, Hebei Province
At Debeike, with experience of over a decade, we work out the best solution for your production
Message content